Film-Tech Forum ARCHIVE: Error 5800

This is topic Error 5800 - ICP Status failed in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=002440

Posted by Charles Saleem (Member # 8323) on 10-15-2015, 03:27 AM:

Dear All,

Im getting an error 5800 in the projector LX II.

I have tried changing everything Fan controller, ICP, Cinema COntroller, SMPS and the Back plane too but the error still persists.

Kindly let me know what else i can check for this error ASAP.

Posted by Steve Guttag (Member # 268) on 10-15-2015, 07:03 AM:

It sounds like it will be either in the ICP or the ICP will need to be updated (if you replaced it) to ensure it is on the same firmware as the light engine satellite boards.

In any event, that error code suggests:

This is a generic TI error. Use the Communicator to make a detailed analysis. Go to Diagnostics > Actual > Cinema Front End
Status > Detailed status > Error Messages.

Based on that information you can then proceed. You can also try logging into the ICP directly using the ICP program to see if it has any information for you.