This is topic VNC on Doremi ethernet ports in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=002572
Posted by Carsten Kurz (Member # 5396) on 02-07-2016, 08:24 AM:
Will a Doremi 2k4/Showvault listen for VNC connections on both ethernet ports, or only on one of them?
- Carsten
Posted by Marco Giustini (Member # 4544) on 02-07-2016, 08:59 AM:
Some time ago someone told me only ETH0, but I believe it never happened to me. Maybe you want to make sure the latest VNC package is installed?
Posted by Dave Macaulay (Member # 813) on 02-07-2016, 05:17 PM:
Both. With current server software and VNC app, at least.
Posted by Aleksandar Obradovic (Member # 7266) on 02-14-2016, 06:14 AM:
Carsten,
It will work on both ports but be careful with "content" ETH if you are ingesting some content over network. It can disrupt ingest or vnc can act strange. Maybe it is solved with new versions of software and vnc package but I can not confirm it.
Alex
Posted by Brad Miller (Member # 2) on 02-14-2016, 12:35 PM:
Definitely both ports, and I've never had any issues whatsoever with using either one, even during content transfer.
Posted by System Notices (Member # 2357) on 06-26-2017, 01:34 PM:
It has been 498 days since the last post.
Posted by Bob Ezra (Member # 841) on 06-26-2017, 01:34 PM:
can someone direct me to the vnc app?
is it dcp2000_X11vnc-1.9.pkg ?
thanks
Posted by Carsten Kurz (Member # 5396) on 06-26-2017, 02:11 PM:
from support.doremitechno.org:
>2017/01/09 New version of the optional package VNC 1.11
- Carsten
Posted by Bob Ezra (Member # 841) on 06-26-2017, 11:22 PM:
just what I needed
thanks