Film-Tech Forum ARCHIVE: Dead nec 2500

This is topic Dead nec 2500 in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=002626

Posted by David J Hilsgen (Member # 2614) on 03-21-2016, 12:31 AM:

Whats a good starting point, the breaker switch is good would it be that power supply down there by the air in take filters or a board

Posted by Leo Enticknap (Member # 534) on 03-21-2016, 12:41 AM:

More info on the symptom of "death," please. No red tail lights when you switch the power on? Red tail lights but you can't get DCC to communicate with the projector?

If is completely dead, as in, no fan or tail lights, my first instinct would be to look for fuses.

Posted by Mark Gulbrandsen (Member # 72) on 03-21-2016, 11:35 AM:

I;d call the undertaker!