Film-Tech Forum ARCHIVE: Kinoton DCP30 picture issue

This is topic Kinoton DCP30 picture issue in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=002693

Posted by Michal Matys (Member # 8614) on 05-24-2016, 02:24 PM:

Hi guys,

I am struggling with an kinoton dcp30 issue and maybe some of you will have an idea what to do to fix it.

The setup is dcp30 with doremi dcp2000 + dolby 3D. I have recently scaled the formats so we dont have to move the lens manually (scope screen) and after that, I started having issues when switching from 3D scope to 2d flat during the trailers/adds. It randomly occured that the picture when switching to 2d flat got cut in half and had this strange noise in it, all you had to do is press 3D scope and then 2d flat and it was fixed.

Kinoton recommended using YCxCz pcf files instead of MXFI which I was using for 3D before so I can play the whole playlist in 3D mode.

Now when I loaded this new pcf file, the 2D picture in 3D mode and 3d format is ok, but the 3D content is for some reason reddish. I copmpared 2 settings of kinotons which use 3D playlist for 3D movie only, and its the same, so I am running out of ideas.

Any ideas what could cause this?

Thank you

Posted by Marco Giustini (Member # 4544) on 05-25-2016, 01:12 AM:

Scaling is bad.

Posted by Leslie Hartmier (Member # 7053) on 05-31-2016, 12:54 PM:

What colourspace are you using on that, and what is the colourspace you are using on the ones that are working correctly?

Even if you think they're the same, it might be useful to check that.

Leslie