Film-Tech Forum ARCHIVE: Ashly FTX 2 channel input modules

This is topic Ashly FTX 2 channel input modules in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=002829

Posted by Mike Babb (Member # 1379) on 10-04-2016, 07:41 PM:

Does anyone have a source for Ashly FTX series dual input modules?

Posted by Dave Macaulay (Member # 813) on 10-05-2016, 07:24 PM:

All I can say is good luck. I've been replacing many Ashly and QSC MX amps with xo modules because the modules failed. Since these amps are old and prone to failure as well, this isn't a hard sell... and they retain some working amps that can replace dead ones that have either stereo or working xo input modules.
Used ones occasionally come up on ebay.

Posted by Mike Babb (Member # 1379) on 10-06-2016, 04:14 PM:

Thanks Dave and agreed, I am just installing 4 processors with on board crossovers, and to take advantage I'll need dual input modules or amp replacement. Lack of availability kind of makes the decision easy.

Posted by Mark Gulbrandsen (Member # 72) on 10-07-2016, 09:48 AM:

Get ahold of Louis Bornwasser!!!!