Film-Tech Forum ARCHIVE: Error: blocked blue- temperture sensor open

This is topic Error: blocked blue- temperture sensor open in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=002901

Posted by Alan Gouger (Member # 543) on 12-26-2016, 01:59 PM:

Barco 4k 23b, under diagnostics/actual I am getting identifier 6034 blocked blue-temperature sensor. Under temperature status Im getting a 0 read out.
Ive yet to hit the service manual, before doing so has anyone had any experience with this error.
I am getting a red light ( hardware error ) on the fan control board.

Posted by Steve Guttag (Member # 268) on 12-26-2016, 02:54 PM:

It could very well be the sensor. It could be the fan controller board as well. Always worth reseating things, unfortunately and if you have multiple units, swapping fan controller modules may point to the problem.

Posted by Alan Gouger (Member # 543) on 12-26-2016, 05:21 PM:

quote: Steve Guttag
It could be the fan controller board as well.

I am embarrassed but happy to say it was that simple. I was fearing something more complicated.

Thank you Steve!