Film-Tech Forum ARCHIVE: CP 2215 with DepthQ first generation

This is topic CP 2215 with DepthQ first generation - Installation help in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=003006

Posted by Samarth Gandhi (Member # 9845) on 04-21-2017, 08:46 AM:

Need help with installing DepthQ first generation with CP 2215. If some one can share the procedure along with channel, lamp and 3D settings both in the projector and DepthQ control box, it would be a great help.

I am struggling as i am getting weird combination colors after activation 3D. Looking for some help here.

Posted by Dave Macaulay (Member # 813) on 04-21-2017, 10:16 AM:

Weird colors means the wrong PCF is selected in the channel setup. This depends on what server you're using, the default setup assumes a typical dual SDI server with the YCxCz PCFs. This setting can be changed directly, try different ones and see which looks good. XYZ and RGB are pretty close but the wrong one will have weird color (not super weird). Use a 185 PCF for flat and a 239 one for scope.
The 3D settings may need tweaking as well, the default is for Real-D I think. can't help you there, I have never encountered this 3D system.

Posted by Samarth Gandhi (Member # 9845) on 04-21-2017, 10:46 AM:

We are using Doremi server. Red is in excess and rest are normal. for 2D it works good but when we switch to 3D this problem persists.