Film-Tech Forum ARCHIVE: Barco DP4K-19B filters

This is topic Barco DP4K-19B filters in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=003140

Posted by Richard May (Member # 2627) on 10-14-2017, 08:04 AM:

Before I pull this monster out of a very tight location, how does the large air filter come out? I changed the 2 smaller ones already without having to take the projector out from where it is. Do I have to take off the front cover?

Posted by Magnus Eriksson (Member # 6085) on 10-14-2017, 08:41 AM:

No. But you have to remove the side panel (the one over the button module & card cage). Then slide the filter out like the small ones.
/M.E.

Posted by Chris Markiewicz (Member # 1415) on 10-14-2017, 10:28 AM:

You'll need at least a foot of clearance to pull the big filter out. When you put it back in make sure it goes all the way in; the frame tends to hang up about 1/2" from fully seating.

Posted by Richard May (Member # 2627) on 10-14-2017, 02:54 PM:

Thanks guys. Found it.