This is topic GDC - 'There are conflicts in schedules using this playlist' in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=003155
Posted by Cameron Yang (Member # 9665) on 11-10-2017, 06:50 PM:
I've opened an existing playlist generated by our LMS on our GDC server, and manually added two light cues (Credit and Feature automation cues to be exact) to trigger halfway through the feature.
Upon trying to save this playlist, it's quoting the following:
'There are conflicts in schedules using this playlist. Please review your schedules'.
I'm confused, as I'm not adding any content that's risking the playlist in question overlapping with the next...can someone help me? I just want to add this bloody intermission but it's proving a nightmare!
Posted by Monte L Fullmer (Member # 2797) on 11-15-2017, 06:16 PM:
Plus, it's usually not a DCP practice to break up a show to have an intermission due to contract agreements. Thus, best check into this prior to the above procedure.
You need to adjust your schedule times better since you are creating an overlap of scheduling - why the error messages.
Thus, if your SPL starts at 1:00, ends at 2:50 and begins again at 3:10 .. then you do the addition of cues for intermission, the SPL time is going over the 3:10 mark for the next scheduled time.
Delete all of those scheduled showtimes and redo with longer periods of downtime...so you don't get this collision.
Posted by System Notices (Member # 2357) on 07-21-2019, 06:18 PM:
It has been 613 days since the last post.
Posted by Peter Mork (Member # 1336) on 07-21-2019, 06:18 PM:
This is an old thread, but I'm having a related GDC problem.
I get the same message, "There are conflicts in schedules using this playlist", when adding a single 2:15 trailer to the program, even though there is plenty of space, around 14 minutes, between shows.
Why would this happen? Would it have anything to do with the Interop to SMPTE switch? A thing or two went a bit hinky after we did the upgrade, change doesn't bother me but this time it's personal... Assuming that's wrong, what to do?
Posted by Mark Gulbrandsen (Member # 72) on 07-22-2019, 08:17 AM:
I have never had that happen AFTER an upgrade is done. I would suggest a call or email to GDC Tech Support on that.
Mark
Posted by Nathan McLaughlin (Member # 10057) on 07-22-2019, 10:14 AM:
I had the same problem. I made a whole new play list and worked fine and I could change the new list no problem,just had reschedule the rest of the week.
Nate