Film-Tech Forum ARCHIVE: Light Meter Calibration

This is topic Light Meter Calibration in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=003219

Posted by Kirk Futrell (Member # 5006) on 02-06-2018, 09:57 AM:

We have a Minolta CS-100 Chroma Meter that I would like to get calibrated. Does anyone have any recommendations where to get that done?

Posted by Scott Norwood (Member # 30) on 02-06-2018, 09:49 PM:

You could try Spectra. They did my SC-600 a few years ago and were pleasant to deal with and fairly priced. I believe that they will calibrate other brands/models, too. It's worth a call. Otherwise, maybe check with a camera repair shop?

Posted by Paul Mayer (Member # 355) on 02-10-2018, 08:07 PM:

Minolta also does calibration on their light meters. That's who we used when I was at Strong.

Posted by Kirk Futrell (Member # 5006) on 02-15-2018, 09:46 AM:

Thanks!

Posted by Mark Ogden (Member # 43) on 02-15-2018, 11:02 AM:

Tektronix, also.

Posted by Mark Gulbrandsen (Member # 72) on 02-16-2018, 01:04 PM:

There is a Konica-Minolta office in Brentwood, TN. I drove past it last November. I can't say for sure they do meter calibrations, but they might take it in and route it to the correct Konica office for you. I used to own one and they are kind of persnickety light meters although accurate, so it might be a good idea to actually have them do it.

Mark

web page