Film-Tech Forum ARCHIVE: USL JSD-100 Outputs??

This is topic USL JSD-100 Outputs?? in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=003349

Posted by Mark Gulbrandsen (Member # 72) on 06-10-2018, 11:21 AM:

Does anyone on here know if the DB-25 analog monitor output is just paralleled with the main amplifier analog outputs? I want to connect a USL XTM-300 electronic crossover to this processor and this is the easiest way to do it. Perhaps Harold H. can chime in if he sees this...

Thanks!

Mark

Posted by Sascha F. Roll (Member # 9043) on 06-10-2018, 11:48 AM:

Yes, paralleled. Using both outputs in some locations...

Posted by Mark Gulbrandsen (Member # 72) on 06-10-2018, 12:06 PM:

Thanks Sasha!

I pulled the top off and took a look inside, but without pulling that output board off the rear panel to be able to see the traces it was hard to tell. Pulling that board off requires removing the main board first.

Mark