Film-Tech Forum ARCHIVE: Christie CP 2210 TPC blank

This is topic Christie CP 2210 TPC blank in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=003656

Posted by Hai Dinh (Member # 8654) on 04-20-2019, 01:18 AM:

Dear, I have Christie CP 2210.
Yesterday, when I turn it on (the first show of the day), the TPC is not turn on (seems like no power).
I change the TPC to another Christie, it works. I bring another TPC to this machine, it doesn't work.
I tried to change power supply adapter inside (XP Power with output 24v and 2.5A), but the same problem.
So do you have any experience about this problem?

Posted by Matthew Heuer (Member # 9199) on 04-20-2019, 06:40 AM:

I had a Solaria 1+ with a similar problem, however changing the standby power supply did fix the problem. It was actually still producing 24 volts and would light the 24v power available led indicators on the internal board and indicated 24 volts on my meter at the plug, however under load it was breaking down and could not supply enough power to run the tpc (one of those lovely misleading problems). Did you indeed change the whole power supply and how far down the line can you read 24 volts. If you have it right to the tpc plug output then I'm afraid I'm stumped considering other tpcs don't suddenly work when plugged in also.

Posted by Annli Com (Member # 8266) on 04-20-2019, 07:57 AM:

Please try with your box office thermal ticket printing machine 24 volt adapter, almost suit .

ShibuPaul