Film-Tech Forum ARCHIVE: Error 3514

This is topic Error 3514 in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=003696

Posted by Agboola Olushola (Member # 10118) on 05-24-2019, 07:58 AM:

This issue just started yesterday while I power the Barco projector DP2k-20c Barco projector. I have checked the Fan controller and the necessary fan connectors but yet still persist to play a movie. The lamp always switches off. I need assistance house.

Posted by Marcel Birgelen (Member # 6801) on 05-24-2019, 09:15 AM:

Did you already try to replace the lamp?

Posted by Agboola Olushola (Member # 10118) on 05-24-2019, 09:36 AM:

The lamp still has up to 600 running hour, so I never thought of the lamp.

Posted by Marco Giustini (Member # 4544) on 05-25-2019, 05:24 AM:

I don’t know what error 3514 means - the communicator will tell you - but if the lamp is involved, replacing it is always step number one. Lamps do fail any time, regardless of warranty hours.

Posted by Dave Macaulay (Member # 813) on 05-25-2019, 11:31 AM:

In demo mode, Communicator returns "description not available" for error 3514 in error lookup. I connected to a real 20C and got the same answer.

Posted by Stephan Shelley (Member # 8587) on 05-25-2019, 12:25 PM:

I think he means 5314 open lamp temp sensor.

Posted by Marco Giustini (Member # 4544) on 05-25-2019, 05:31 PM:

Then changing the lamp won’t help.