Film-Tech Forum ARCHIVE: Cinelister system events

This is topic Cinelister system events in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=003745

Posted by Gronw Roberts (Member # 9141) on 07-20-2019, 05:37 AM:

Hi all.

Is there any way to see the CineLister system events warnings again after viewing them? There was one that mentioned something about replacing a battery that I didn't catch. They never stay on screen long enough to read properly!

Thanks.

Gron.

Posted by Marco Giustini (Member # 4544) on 07-20-2019, 06:04 AM:

I suppose it'll come back if you reboot - but logs will have it. If it's a battery warning, chances are it's just a timer that pops up every x years - it may not mean that your battery is actually depleted.

Download the logs and load them here: Dolby Log Analyzer

Posted by Carsten Kurz (Member # 5396) on 07-20-2019, 06:56 AM:

You can bring back previous notifications through the lower right 'task bar' symbol of the notification engine.

e.g.

http://doremi-techno-legacy-portal.dolbycustomer.com/index.php/faq/680-notification-engine-repetitive-warnings

- Carsten

Posted by Dave Macaulay (Member # 813) on 07-20-2019, 08:55 AM:

These pop up a little window when first triggered, the red ball number is incremented and the window hides after a few seconds.
After looking at them, before rebooting, clicking on that ball (red or clear) pops up the first warning and you can use the navigation buttons on the popup to go through them if it has more than one.
"Permanent" events like battery or maintenance time warnings will come back on reboot, most one-shot ones go away on reboot. Some will repeat... ie if your NTP source goes offline then you will get a lot of NTP failure warnings piled up.

Posted by Gronw Roberts (Member # 9141) on 07-30-2019, 02:01 PM:

Great stuff, thanks.