Film-Tech Forum ARCHIVE: Barco Communicator Post Production Issue

This is topic Barco Communicator Post Production Issue in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=003763

Posted by Harcharan Singh (Member # 10296) on 08-09-2019, 09:17 AM:

Hi,
I am using the Barco Communicator Post vesion.
In the post module I trying the decrease the brightness but I am not seeing any changes . I used the refresh button on to right corner of screen but no result.
I am able to change EOFT, Input etc but nothing in the color conversion matrix ( where you have brightness,contrast hue) seems to work.
Am I doing something wrong.
Thanks
Harcharan

Posted by Leo Enticknap (Member # 534) on 08-09-2019, 11:28 AM:

I encountered a similar problem once before - it turned out to be a version mismatch between the firmware in the projector and Communicator Post.

I'd suggest downloading the current projector firmware version (2.8.86, assuming that your projector is a DP4K-P) and the current Communicator Post version (5.13.0), if you are not on these versions already. If you already are, I'd email Cinionic.