Film-Tech Forum ARCHIVE: Christie CP2210 Light Out due to Open Interlock

This is topic Christie CP2210 Light Out due to Open Interlock in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=003772

Posted by Andrew Freeman (Member # 9951) on 08-16-2019, 07:49 PM:

Hey everyone! Happy Friday, always the best day to have projector issues...we just received an error on one of our Christie CP2210, where in between shows we noticed, "Light Out due to Open Interlock", but we are still on screen and have yet to lose a show. Anyone have any thoughts? Thanks so much!

Posted by Bradley J Sime (Member # 9423) on 08-28-2019, 02:58 PM:

I've had this before. We had to get the interlock system on the main door replaced. It'll likely keep happening until you do this.

Posted by Stephan Shelley (Member # 8587) on 08-28-2019, 06:07 PM:

Check the fire alarm jumper or connection on the side of the projector above the card cage. It is considered an interlock along with the lamphouse door. If there is a fire alarm connected make sure there is not a bad connection in it.

Posted by Mark Gulbrandsen (Member # 72) on 08-29-2019, 06:27 AM:

If it's an actual switch like on the projection consoles just bypass it like everyone else did. Switches are so 1970's!

Mark