Film-Tech Forum ARCHIVE: New DP-70 Parts Now Available

This is topic New DP-70 Parts Now Available in forum Equipment and Supplies Wanted/For Sale at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=2;t=001327

Posted by Mark Gulbrandsen (Member # 72) on 07-08-2004, 11:43 PM:

We have put several hard to get, sought after, DP-70/AA-2 parts back in production plus added some upgrades/updates to extend the life span of these fantastic projectors till the end of film.

These now include:

SHORT XENON LAMPHOUSE TABLE AND SLIDE
Fully adjustable slide, finsihed in the original color.
995.00 ea

LENS BUSHING:
One piece 35/70 ecentric bushing directly takes 70.6mm diameter lenses.
360.00 ea

24 TOOTH VKF SPROCKETS: (available soon)
To replace the expensive combo alumnium sprocket.
95.00 ea.

BACP RSTR2000KA-2 RED LED READER:

RSTR 2000 installed on rebuilt and refinished soundhead. These also now have a "split" lateral guide roller for no film weave. All wiring terminates to a male 9 pin D connector on the rear of the sound head which allows for easy removal and maintainance.

Note: Original soundheads are stripped, machined for the kit, clean up grind on the sound drum O.D., casting is powdercoated, new bearings with proper pre-load spring, lateral guide is split and now spring loaded for no weave, wiring is to 9 pin D connector on rear of sound head which conforms to Dolby cell pinout.

1295.00 with exchange soundhead.

(Inquire about oughtright sound reproducer purchase if needed.)

VARIABLE FREQUENCY MOTOR DRIVE KIT:

Gets rid of the existing motor, mount, and V belt. Smoother operation and smoother startups/rundowns, adjustable overcurrent protection can save gear train in event of film wrap on sprocket or seize up, Auto-Jog feature stops projector in threading position, easy interface to automation.
1295.00 ea.

Complete conversion includes: Controler, motor, motor mount, coupling, instructions.

CLACO Equipment And Service
1212 South State St.
Salt Lake City, UT 84111
801-355-1250 Phone
801-355-1259 Fax
e-mail vince@clacoequipment.com

posted by
Mark @ CLACO