Film-Tech Forum ARCHIVE: WTB (or trade for) Norelco 4-inch lens holder

This is topic WTB (or trade for) Norelco 4-inch lens holder in forum Equipment and Supplies Wanted/For Sale at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=2;t=002198

Posted by Paul H. Rayton (Member # 1817) on 04-18-2007, 08:25 PM:

Looking for the "larger" lens barrel that will fit many of the Norelco / Kinoton projectors. By "largeR" size, I mean the larger diameter of the barrel hole that actually contains the lens -- around 4 inches wide, or, more precisely 101.6mm.

The lens barrel (or holder) is about 4 inches long itself (the part that holds the lens), and it has a pair of "rails" that extend fore and aft of the barrel itself, they being about 6 1/2 inches long. And there is a small, kind of "T-shaped" protrusion coming out of the bottom, just over 1 inch long, that is part of the pre-focus positioning of the device.

Would like to buy one (if reasonable), or possibly trade you two of the "regular" lens barrels in exchange.

You may e-mail me at < paulrayton@yahoo.com > or telephone me at work at (Los Angeles) 323-467-3475.