Film-Tech Forum ARCHIVE: SEE NEW LISTING: Bodine motors (48R5'S BOTH SOLD), for projectors and platters

This is topic SEE NEW LISTING: Bodine motors (48R5'S BOTH SOLD), for projectors and platters in forum Equipment and Supplies Wanted/For Sale at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=2;t=003356

Posted by Tony Bandiera Jr (Member # 2365) on 09-22-2010, 03:12 PM:

Have several Bodine motors for sale, all are used, were pulled from service and have been tested UNLESS otherwise noted. ALL ARE PRICED EACH.

For compatibility with your needs, check out the part numbers, Voltage, RPM's and HP ratings. (All shaft sizes are nominal.) All motors are 60Hz and the 3-phase units were used and are usable with VFD drives.

Here's the list:

(2) 48R5BFPY, 230v, 1800rpm, 1/3HP, 3phase, 9/16" shaft. $30.00
(2) 42R5BFPP, 230/460v, 1700rpm, 1/4HP, 3phase, 5/8" and flywheel, $40.00
(1) 90v DC, Christie MUT motor 1710rpm, 1/10HP (same style as platter deck motor), $30.00 UNTESTED
(1) 90v DC, Christie Platter deck motor, no connector plug, UNTESTED, $25.00
(2) 48R6BFSY, 115/230v, 1800rpm, 1/5HP. 1phase, 9/16" shaft, one with flywheel, one without price $35.00with/$25.00without

All prices do NOT include shipping. Remember that motors are a bit heavy. Estimated shipping to lower 48 US is around $25-40.

Shipping to Canada quoted on request. All duties and Customs fees are buyer's responsibility.

Pics on request.

mxslick@hotmail.com