Film-Tech Forum ARCHIVE: Still Need - Cinemeccanica Sprockets

This is topic Still Need - Cinemeccanica Sprockets in forum Equipment and Supplies Wanted/For Sale at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=2;t=005201

Posted by Phillip Grace (Member # 2262) on 06-10-2019, 04:55 PM:

I need two new 35mm Intermittent Sprockets to fit Cinemeccanica Victoria 8 projectors. Their original part number is 001C. The same part will also fit Victoria 5 and Victoria X. Also looking for new 35/70mm Upper and Lower feed sprockets for the Victoria 8. Part numbers for these were 702 and 704. please email me at: phillip.grace@acmi.net.au
Thanks.