Film-Tech Forum ARCHIVE: Rush Hour 2

This is topic Rush Hour 2 in forum Feature Info, Trailer Attachments & REAL Credit Offsets at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000246

Posted by Chase Taylor (Member # 778) on 08-01-2001, 05:39 PM:

New Line
ETS depot
5 reels
Running Time: 83 Min.
2.35 Scope
SRD/SDDS/DTS/SR
Attached: Lord of The Rings: Fellowship of the Ring

All About the Benjamins
Big Trouble
From Hell
Ali
Jay and Silent Bob Strike Back
Training Day
Bones

Posted by Brad Miller (Member # 2) on 08-01-2001, 11:05 PM:

My print had Bubble Boy in place of Big Trouble for the list of loose trailers.

Also, Fuji film stock and NO lab splices in either print! (Just regular release prints.)

WARNING: None of the THX logos are on the discs...again!

Posted by John Pytlak (Member # 331) on 08-02-2001, 08:00 AM:

Brad said: "Also, Fuji film stock and NO lab splices in either print! (Just regular release prints.)"

Having no lab splices is just the luck of the draw. AFAIK, Fuji supplies raw stock for release printing in the same lengths Kodak does. Most labs use either 4000-foot or 6000-foot lengths, so ON AVERAGE, 1 out of 3 reels may have a lab splice. It is certainly possible to get a print where all reels are splice-free, and then get another print where every reel has a lab splice.

------------------
John P. Pytlak, Senior Technical Specialist
Worldwide Technical Services, Entertainment Imaging
Eastman Kodak Company
Research Labs, Building 69, Room 7419
Rochester, New York, 14650-1922 USA
Tel: 716-477-5325 Cell: 716-781-4036 Fax: 716-722-7243
E-Mail: john.pytlak@kodak.com
Web site: http://www.kodak.com/go/motion

Posted by John T. Hendrickson, Jr (Member # 849) on 08-02-2001, 10:52 AM:

My prints also included The Musketeer (Universal) loose in the can.

from ETS, Elizabeth, NJ

Posted by Tim Sherman (Member # 569) on 08-03-2001, 05:01 PM:

No lab splices on my print either, for once. The lab splces always seem to go through the middle of the frame too. I can't stand them and they look bad on screen. i have too cut them out and use a regular tape splice

------------------

http://www.autoramadrivein.com

come on out to the drive-in and spend a night out with the stars"
ME!!