This is topic Extreme Days in forum Feature Info, Trailer Attachments & REAL Credit Offsets at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000286
Posted by Steve Scott (Member # 630) on 09-27-2001, 11:10 PM:
TES Depot
5 Reels
Flat
SRCan't remember the releasing company
No trailers
Posted by James R. Hammonds, Jr (Member # 673) on 09-28-2001, 03:55 AM:
Releasing company is Providence Entertainment.
Posted by Darryl Spicer (Member # 711) on 09-28-2001, 08:51 AM:
NOTE: The film is a blow up from 16MM you need to be careful of where the frame lines are on this one.
Posted by Paul Konen (Member # 41) on 09-28-2001, 10:46 AM:
My print has the "error" in printing.3 perfs of normal image
1 perf of the following top bit of frame, black, bottom bit of frame.
We have been told to project at either 1.66:1 or manually mask the image through the port hole.
TES doesn't have any replacement prints because quite a few prints were struck like this.