This is topic Format of 'The Right Stuff' (1983)? in forum Feature Info, Trailer Attachments & REAL Credit Offsets at Film-Tech Forum ARCHIVE.


To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000502

Posted by George May (Member # 1060) on 05-07-2002, 04:11 AM:
 
I'm planning a special outdoor screening of Philip Kaufman's 1983 film 'The Right Stuff. Warners, the UK distributor assures me it's in 'Scope, though the IMDB tells me it's in normal 1:1.85 widescreen. (http://uk.imdb.com/Technical?0086197) and that's my memory too from when I showed it years ago.

I need to know for cetain, as the distance at which I set up the scaffolding tower for the projector depends on this vital fact! Can anyone help?

Thanks.

George May

george.may@iplbath.com
 


Posted by Peter Kerchinsky (Member # 1098) on 05-07-2002, 04:35 AM:
 
Howdy:
If memory serves me right, RIGHT STUFF was 1.85.
There may be some confusion on Warners part in that most of the showings of that film in the states were 70MM and maybe they thought the reduction prints were going to be in Scope.
By the way I thought that film was one of the best films of it's time. Unfortunately I understand it did not do much business in the good ol' USofA.
Fuckin A Bubba!
 
Posted by Michael Brown (Member # 890) on 05-07-2002, 04:44 AM:
 
This should be in feature into and trailer attachments
 
Posted by Scott Norwood (Member # 30) on 05-07-2002, 05:57 AM:
 
Are there any 70mm prints of this still in circulation which are in presentable condition?
 
Posted by David Stambaugh (Member # 1102) on 05-07-2002, 01:50 PM:
 
"This information is not based on actually handling a print" I'm violating the forum rule about not posting unless I have actually handled the print, since it's unlikely anyone will have this at their fingertips (literally). (I know, I'm in deep now)

The Widescreen Review 70mm Filmography sez:

Spherical (1.85:1)
6-Track Dolby Stereo


 


Posted by Michael Coate (Member # 757) on 05-07-2002, 02:39 PM:
 
I'm unaware of any scope prints for this title. If there are any it would mean they did a dual-format release. (Is that likely???)

THE RIGHT STUFF

35mm prints:
Flat 1.85:1
Dolby A
# reels: A lot! (I think 10 or 11)

70mm blow-up prints:
side-matted to (approximate) 1.85:1
Dolby A (Format 42/babyboom/single-surround)
# reels: A lot! (I think 10 or 11)

Information above pertains to original 1983/84 prints. If any new prints have been made, it's possible the audio could be SR or any of the digital formats.


quote:
There may be some confusion on Warners part in that most of the showings of that film in the states were 70MM and maybe they thought the reduction prints were going to be in Scope.

Reduction prints? "The Right Stuff" was shot in 35mm (not 65mm) so the 35mm prints would've been "normal" contact prints and the 70s would've been a blow-up. Could this "flat"/"scope" confusion stem from some spherical blow-ups (not "The Right Stuff," however, unless different sets of prints were made) sometimes filling the full width of the 70mm frame giving the impression that perhaps the film is scope ("Rollerball," for instance)?

While there were a fair number of 70mm prints in circulation of this title, *most* of the North America engagements were actually 35mm. However, *most* of the big city engagements (LA, NY, Chicago, etc.) were screening one or a few 70mm prints.


George,
Let us know what format your print is when it arrives, please.


 


Posted by George May (Member # 1060) on 05-08-2002, 07:11 AM:
 
Yes, I'll tell you the format of what I get, but don't hold your breath. It's not till September!
 
Posted by John Wilson (Member # 269) on 05-08-2002, 10:22 AM:
 
definately 1.85:1.

Excellent film. One of the best.

John

------------------
"It's not the years honey, it's the mileage". - Indiana Jones.
 


Posted by John Hazelton (Member # 898) on 05-24-2002, 12:39 PM:
 
I'll add another confirmation to Michael's info.

Original 35mm prints of "The Right Stuff" are:

1.85
Dolby A
10 reels
 


Posted by Darren Briggs (Member # 1071) on 05-25-2002, 03:21 PM:
 
Here in the U.K there is a realy good 70mm print of
'The Right Stuff' around.
My boss asures me i will get to show it! Just installed 70mm , not DLP!

Cya
Darren
 


Posted by Steve Kraus (Member # 476) on 05-27-2002, 09:46 PM:
 
Is that for sure? You've seen this print? I may need it next April...
 
Posted by George May (Member # 1060) on 09-09-2002, 04:46 AM:
 
I now have the print in my hands (in fact, I'm told it's the only print of 'The Right Stuff' for hire in the UK). It's 1:1.85.

The show is on September 11th. See wwww.pyjamapictures.org.uk

George
 


Posted by Darren Briggs (Member # 1071) on 01-28-2003, 04:01 PM:
 
70mm Print here in the U.k
Excellent condition

10 reels
Dolby A format 42
1.85:1 Ratio (YES MICHAEL 1.85:1 RATIO, SIDE MATTE BARS)
193 mins
Warner Bros Dist

Anyone else show it here in the U.K
LOOK AFTER IT PLEASE!!!

[ 01-31-2003, 04:03 PM: Message edited by: Darren Briggs ]
 
Posted by Michael Brown (Member # 890) on 01-29-2003, 03:39 AM:
 
1.85:1 on 70mm ??
 
Posted by John Pytlak (Member # 331) on 01-29-2003, 10:24 AM:
 
Yes. Some 70mm productions were shown with a 1.85:1 ratio, with black "side bars" printed on the film. Other examples include "E.T. The Extraterrestrial".
 
Posted by Claude S. Ayakawa (Member # 1401) on 01-29-2003, 11:14 AM:
 
Beside Steven Spielberg's "ET", his" EMPIRE OF THE SUN" was also shown in 70mm in 1.85.1.

-Claude
 
Posted by Michael Coate (Member # 757) on 01-29-2003, 01:05 PM:
 
quote:
Beside Steven Spielberg's "ET", his" EMPIRE OF THE SUN" was also shown in 70mm in 1.85.1.
Why single out one or two titles as if they were unique cases??? Dozens of titles were blown up to 70mm with matting on the frame edges to preserve a narrower aspect ratio. The 70mm film list I worked on for Widescreen Review identifies most of these types of 70mm prints.
 
Posted by Paul Linfesty (Member # 214) on 01-29-2003, 03:02 PM:
 
Isn't this section reserved for print specs of the ONE title of this thread? [Smile]
 
Posted by System Notices (Member # 2357) on 01-09-2007, 05:19 PM:
 

It has been 1441 days since the last post.


 
Posted by Blaine Young (Member # 3992) on 01-09-2007, 05:19 PM:
 
Both "Dick Tracy" and "Who Framed Roger Rabbit" were printed 1.85 on 70mm with matte bars down the sides of the image. We were tempted to close the masking to 1.85, but the studio (Disney in both cases) asked us not to so as to prevent any dampening of the audio from the L/R channels. Of course, they're assuming the speakers are at the absolute edge of the screen.
 
Posted by Jeffry L. Johnson (Member # 453) on 01-11-2007, 01:09 PM:
 
Peruse the lists.

70mm blow ups
 




Powered by Infopop Corporation
UBB.classicTM 6.3.1.2