This is topic Breaker Morant (1980) in forum Feature Info, Trailer Attachments & REAL Credit Offsets at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=003202
Posted by John Wilson (Member # 269) on 03-03-2009, 03:15 PM:
Flat 1.85:1
Mono
6 Reels
Ex-release print from National Film Archives.
Posted by System Notices (Member # 2357) on 12-01-2012, 10:50 PM:
It has been 1369 days since the last post.
Posted by Reece Black (Member # 1029) on 12-01-2012, 10:50 PM:
Title: Breaker Morant
Source: NFSA – KODAK/ATLAB collection
Rack/Title: ZCZ000308-ZCZ000313/0004461_0026
Gauge: 35mm
# Of Reels: 6
Stock: 2383, K•ODAK, 2000, polyester
Aspect Ratio: open matte, intended 1.85:1
Audio/Soundtrack: dual bilateral, KODAK/ATLAB collection/restotarion is SR,SR.D, centre channel playback only.
Posted by John Wilson (Member # 269) on 12-09-2012, 07:21 PM:
You get the good print, Reece. ![[Wink]](wink.gif)
Posted by Reece Black (Member # 1029) on 12-11-2012, 08:30 PM:
Hi John,
Heads and tails cut and edge marked with permanent market at previous location.
Multiple sets of cues scribed at previous location/s.
Moderate scratching between perforations throughout all reels, as received.
Light cinching at tails, all reels, heavy at tail, reel 3, as received.
Moderate embedded dirt at heads and tails, all reels, as received.
1 ultrasonic splice at approximately midway, all reels, as received. Replaced 5 perforation tape reinforcement splices with 3 perforation tape splices, all reels.
Moderate crease, mid image and moderate edge crimping, over 5 frames at 14’ from tail reel 2, as received.
Reosonably good condition.
This particular print, we call a Z print, has to be run on changovers, although, it has been previously cut.
Posted by John Wilson (Member # 269) on 12-19-2012, 03:06 PM:
It still sounds better than the one we got a couple of years back.