This is topic MIB II standee in forum Ground Level at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=000442
Posted by Mike Blakesley (Member # 26) on 02-06-2002, 07:14 PM:
Could somebody please post the measurements of the new MIB II standee (length and height). I have a place to put it, but don't want to assemble unless I know it'll fit!
Posted by Ron Lacheur (Member # 1126) on 02-06-2002, 07:22 PM:
don't know the EXACT measurement, but it's a big one.
Posted by David Favel (Member # 1125) on 02-06-2002, 08:44 PM:
IT IS A BIG ONE
APPROX 2.8 METRES LONG X 8 FEET HIGH
Posted by John Pytlak (Member # 331) on 02-06-2002, 10:19 PM:
David Favel said: "APPROX 2.8 METRES LONG X 8 FEET HIGH"That's almost as bad as saying 35mm film runs 90 feet per minute. 
------------------
John P. Pytlak, Senior Technical Specialist
Worldwide Technical Services, Entertainment Imaging
Research Labs, Building 69, Room 7525A
Rochester, New York, 14650-1922 USA
Tel: 716-477-5325 Cell: 716-781-4036 Fax: 716-722-7243
E-Mail: john.pytlak@kodak.com
Web site: http://www.kodak.com/go/motion
Posted by Christopher Finn (Member # 938) on 02-07-2002, 02:08 AM:
If I am not mistaken, the recording at 1-800-SONY-PIC said it was eight feet tall by eight feet wide.Hope that helps!
Chris
Posted by David Favel (Member # 1125) on 02-09-2002, 12:08 AM:
FOUND ON 27 JUNE 2000 POST
"Sound film should run 24 frames per second, or about 90 feet per minute."GUESS WHO POSTED THIS
Posted by Mike Blakesley (Member # 26) on 02-10-2002, 08:15 PM:
Dave, the two sentences are completely different. He was joking about mixing metric with decimal (your measurements mixed meters and feet). His origianl post only uses one measurement..."Sound film" not "35mm film."Anyway, thanks for the measurements. I think I've gotta farm this display out somewhere, my space is not that tall.