Film-Tech Forum ARCHIVE: Server FSP Buttermat help

This is topic Server FSP Buttermat help in forum Ground Level at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001109

Posted by Josh Jones (Member # 447) on 04-10-2004, 09:10 PM:

I found one of these in the basement of the theatre, and want to use it again. It needs a knob, the ball valve, and a new heating element. The old element tests open. It resembles a band of mica with a heating element wound around it. How much do these parts cost, and where can I get them?

Josh

Posted by Josh Jones (Member # 447) on 04-11-2004, 04:27 PM:

anyone?

Posted by Floyd Justin Newton (Member # 1316) on 04-11-2004, 10:19 PM:

Josh--

Somewhere on the unit is a metal plate with all the information
on it. re: voltage, amperage, wattage and serial #. Also who
made it. These things cost a fortune, so parts can cost quite
a bit. Most any concession supply house can order parts for
you.

fjn

Posted by Bill Carter (Member # 156) on 04-12-2004, 10:24 AM:

Hey Josh,

Try:

Dakota Food Products
1802 First Avenue S
Fargo, ND 58108-2925
Ph: 701.232.4428

I believe they are dealers for this line.

Bill Carter

Posted by Josh Jones (Member # 447) on 04-12-2004, 10:24 PM:

Their parts and service department migrated up to Grand Forks for some reason. $45.60 for the element. That seems a bit on the outrageous side.

Josh

Posted by Don Anderson (Member # 397) on 04-12-2004, 11:51 PM:

Go to their website. www.serverproducts.com

They probably won't sell directly to you. But, they can put you in touch with a local dealer/supplier. Server Inc. is about 15 miles from my house.

Posted by Andy Bergstrom (Member # 360) on 04-19-2004, 11:22 AM:

Josh,
Try Clark Products. Mark Wiosky (800) 947-1576. Great company to deal with.

Thanks,
Andy