This is topic Parts Info Needed For G-M Nacho Warmer in forum Ground Level at Film-Tech Forum ARCHIVE.


To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=002121

---

Posted by Jim Cassedy (Member # 4115) on 11-03-2008, 09:06 AM:
 
I need parts info for a Gold Medal Model 5587
Nacho Warmer. I've looked all around the theater
and online for documentation with no luck.

Here's What It Looks Like:


Specifically, I'm looking for a part number for the
blower. I've got two that are burned out. There is
a number (21C75051) stenciled on the blower, but I
don't know if that's a Gold Medal part number or
the blower manufacturers part number. I've been
unable to cross-reference it online.

The other info printed on the motor coil windings
is illegeble due to being burned off by excess heat.
 

---

Posted by Monte L Fullmer (Member # 2797) on 11-03-2008, 01:04 PM:
 
Check with this supplier for GM parts.

The motor looks like a Dayton motor. You can also tag into Grainger for the replacement motor. On the motor itself, look on the label and there should be a Dayton part no. somewhere in that label. It's a number/letter combination part number. Otherwise, in the Grainger catalog, look for "blower" motors - the shaded pole variety in the search section.

Good luck - Monte
 

---

Posted by David Mann (Member # 4917) on 11-03-2008, 06:42 PM:
 
Go to Grainger, that looks exactly like the blower motor for a Christie H-20 lamp. I've bought lots of them there.
 

---

Posted by Monte L Fullmer (Member # 2797) on 11-04-2008, 12:50 AM:
 
It looks like this little guy, or this other little guy from Graingers.

-Monte
 

---

Posted by Jim Cassedy (Member # 4115) on 11-04-2008, 09:09 AM:
 

quote: David Mann

---

Go to Grainger, that looks exactly like the blower motor for a Christie H-20 lamp.

---