This is topic poster frames for home use (?) in forum Film-Yak at Film-Tech Forum ARCHIVE.


To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=000071

Posted by Scott Norwood (Member # 30) on 12-10-2000, 08:51 PM:
 
I'm not a "serious" collector of movie posters, but I do have a few (most of prints that I own) that I would like to display without causing damage to them with tacks or tape. (Nothing that would be valuable to anyone but me, though...)

Does anyone make relatively cheap movie-poster-size frames that would be appropriate for home use? I don't want the full-blown theatre-type wooden or metal cases...just a simple plastic thing that will hold the poster in place without tape or tacks would be ideal. I really just want something like a big picture frame that is cheap and doesn't look horribly ugly.

Who (if anyone) makes something like this? Where can I get one? Any ideas? Surely there must be serious poster collectors out there who have needed this in the past...
 


Posted by Adam Martin (Member # 641) on 12-10-2000, 09:49 PM:
 
I never could find any. Luckily (for me) the company I used to work for had me on the close-down crew for dead theaters and I would be the first tech in on the last night of operation and -oops- they were on the wall yesterday . . . Although, sometimes I had to drop off a few at the Director of Operations' house.
 
Posted by Randy Stankey (Member # 64) on 12-10-2000, 10:10 PM:
 
Video Stores, like Suncoast and the like have plexiglass "sandwich" frames for sale. They cost about $25 apeice. I'm going to get a couple for the two Tomorrow Never Dies posters I have hanging in my living room. (I just found out that they have been selling for $50 apeice.)
 
Posted by Brad Miller (Member # 2) on 12-10-2000, 11:40 PM:
 
The frames Randy speaks of aren't super fancy, but definitely do the job and will protect the poster. Suncoast is the only place I know of to get them, but surely there are others.
 
Posted by Doug Fields (Member # 589) on 12-11-2000, 06:18 AM:
 
Hey Scott,
Check out this site: www.allposters.com
Not only do they have frames for sale, but they have zillions of posters. Many times they don't know what they have, as evidence of the US version of "The World is not Enough" is still selling for $13.99.

Have fun
Doug Fields

 


Posted by Mark Lensenmayer (Member # 134) on 12-11-2000, 07:11 AM:
 
I have 4 of the black plastic poster frames. They do a very nice job, although I wouldn't want to change the poster frequently. They were about $20 at Media Play.

For temporary use, I bought 2 strips with rollers in them, like they use at pizza restaurants to hold the order slips. You just slide the poster under the roller and it is held up without any pins. Then, when you want to make a change, you just slide out the poster and slide in a new one. I got them at OfficeMax, but most office supply stores should have them in stock or should be able to get them very quickly.

Mark Lensenmayer

------------------
"As a moral to young men who come down to the city, don't go round breaking people's tambourines."
 


Posted by Randy Stankey (Member # 64) on 12-11-2000, 10:49 AM:
 
You could also do what they do at museums... it's called "Mylar Encapsulation".

You get some big sheets of clear Mylar and use archival quality tape and make a giant "envelope" to put the poster in. My girlfriend is in charge of a museum and that's what they do to store their valuable posters and stuff. They leave about 1/2 inch over the edges so there's room to tack it up or put it in a frame without touching the poster itself.

When you check those poster places, make sure they aren't selling "reproductions". They'll often say "Original Release Poster" but they'll really mean "Reproduction of an Original Poster". I got stung like that on my Cinema Paradiso poster. When I got it I unrolled it and found that there was no printing on the back and the image didn't go all the way to the edges! I was pissed but I looked at the catalog again and it said in fine print, "reproduction". I still kept it, though. It's hanging on the other side of my living room.
 


Posted by John Wilson (Member # 269) on 12-13-2000, 05:01 AM:
 
posters didn't always have prints on both sides...nor did the one sheets or daybills go all the way to the edges...

Most of mine are as you described and a quick glance at the posters section of ebay will tell if you they are worth real money.

Such as my original 3 sheeters for Star Wars (1977) and The Empire Strikes Back (1980) for example.

I've also got a 3 sheet for Convoy, although somehow, I think it's perhaps not worth as much.

"Breaker one-nine, this here's the Rubber Duck"...


 


Posted by Frank Rapisardi (Member # 435) on 12-13-2000, 06:41 AM:
 
Poster cases.I got several from a theater which was being remodeled.They were just going in the dumpster anyway.The manager said"Take as many as you want" I put four in my home theater,and gave the rest to friends.These are the real(REEL) things. See if you can locate a theater that is closing or being remodeled.To buy these from a theater equipment company would cost well over one hundred dollars each.(Even for the basic models) Mine snap open and closed;to change posters. Good luck.

------------------

 


Posted by System Notices (Member # 2357) on 01-19-2010, 04:42 PM:
 

It has been 3324 days since the last post.


 
Posted by Jeremy Jorgenson (Member # 2989) on 01-19-2010, 04:42 PM:
 
quote: Brad Miller
Suncoast
is where I used to buy my frames... I don't think they exist anymore, do they?

I also checked out
quote: Doug Fields
www.allposters.com
but they don't seem to offer frames the size of a one sheet (or did I totally miss that on the website?)

Has anybody gotten a one sheet poster frame recently?
 
Posted by Joe Redifer (Member # 3) on 01-19-2010, 05:01 PM:
 
I used to be able to get perfectly sized frames at a place called Media Play (which no longer exist) for about $15 each. I went around town to all of the different Media Play outlets and bought ALL of their poster frames in the one-sheet size. Lucky I did, because they closed a couple of months after I did this. So I have about 12-15 of the frames. They are pretty nice with a black frame and cover the poster with plexiglass. However I have not seen any similar frames for sale anywhere since.

 -

Note: I only have the Pirates poster because I think it looks cool, not because I am a fan!
 
Posted by Justin Hamaker (Member # 2165) on 01-19-2010, 05:02 PM:
 
I found a good black plastic frame a K-Mart for about $25.00. It's nothing fancy, but it does the job and actually looks pretty good.
 
Posted by Brad Miller (Member # 2) on 01-19-2010, 05:31 PM:
 
quote:
Note: I only have the Pirates poster because I think it looks cool, not because I am a fan!
Uh huh. And Phil only has the 17 Again poster because he thinks it looks cool, not because he likes Zac Efron.
 
Posted by Jonathan Althaus (Member # 5042) on 01-19-2010, 05:59 PM:
 
Notice how the Kill Bill Vol 2 says "Final Cut", yet QT is working on another Kill Bill film and he says The Bride will be back......
 
Posted by Joe Redifer (Member # 3) on 01-19-2010, 06:26 PM:
 
Brad, I also only have the Pirates Blu-ray because it was offered for free when I bought my PS3. No Zac Efron Blu-rays have ever been offered for free, so Phil is far guiltier than I am.
 
Posted by Bobby Henderson (Member # 840) on 01-19-2010, 07:27 PM:
 
I find it really annoying how just about any store selling poster and picture frames -everyone from Wal-Mart and Hobby Lobby to the local frame shop has "standard" 27" X 40" poster cases, but not any in the actual 27" X 41" one-sheet size.
[Mad]
 
Posted by Jeremy Weigel (Member # 4208) on 01-19-2010, 07:40 PM:
 
Walmart carries the full size poster frames that Suncoast carries for 19.99.
 
Posted by Bobby Henderson (Member # 840) on 01-19-2010, 08:02 PM:
 
All the ones I've seen in Wal-Mart are 27" X 40" -an inch under budget on the one sheet's height.
 
Posted by Joe Redifer (Member # 3) on 01-19-2010, 08:08 PM:
 
EDIT: Nevermind. I made an idiot post. Not the first time and it won't be the last!
 
Posted by Jeremy Jorgenson (Member # 2989) on 01-19-2010, 08:21 PM:
 
Ok, thanks for the replies! I'll check out Wal-Mart (if I must make do with a 27X40 I will, I was hoping for a 27X41).

quote: Jonathan Althaus
Notice how the Kill Bill Vol 2 says "Final Cut", yet QT is working on another Kill Bill film and he says The Bride will be back.
...well, "final cut" for Bill. He said from the get go that he liked the idea of the story continuing with Vernita Green's daughter looking for revenge 10 or 15 years later.
 
Posted by Jeremy Weigel (Member # 4208) on 01-19-2010, 08:36 PM:
 
All the one-sheets I have here measure 27x40 except Sony's which measure 39.5x40.
 
Posted by Mike Blakesley (Member # 26) on 01-19-2010, 09:29 PM:
 
Jeremy: WTF are you talking about? Nearly-square onesheets? We need pictures. All the Sony's I have are the same as everyone else's, 27x40.
 
Posted by Bobby Henderson (Member # 840) on 01-19-2010, 09:49 PM:
 
I measured one of the posters I have, The English Patient. It is 27" X 40". I'll have to look through the rest to see where I originally got that 27" X 41" measurement.
 
Posted by Randy Stankey (Member # 64) on 01-19-2010, 10:18 PM:
 
The measurement for "one sheet" was changed in 1985: http://en.wikipedia.org/wiki/One_sheet

quote: "From Wikipedia"
A one sheet is a specific size (typically 27" x 41" in size before 1985; 27" x 40" in size after 1985) of film poster advertising. Multiple one-sheets are used to assemble larger advertisements, which are referred to by their sheet count, including 24-sheet[1] billboards, and 30-sheet billboards. The term is also used as synonym for the poster artwork itself.

 
Posted by Bobby Henderson (Member # 840) on 01-19-2010, 11:46 PM:
 
Most of the one sheets I have are from movies released after 1985 and at least a few are of the larger 27" X 41" variety.

I guess some double-checking will be in order if I buy any of those inexpensive poster cases from "Wally World."
 
Posted by Jeremy Weigel (Member # 4208) on 01-19-2010, 11:53 PM:
 
Lol... Sorry Mike that's what I get for typing and talking to someone at the same time. Sony one sheets are 26.75"x39.75 (just measured again to make sure). It's really annoying too since we have to tape them down in our poster carriers in the outside display cases.
 
Posted by Jeremy Jorgenson (Member # 2989) on 01-20-2010, 06:53 AM:
 
Bobby, I remember 41" too. I started working at theatres in '93 ...
 
Posted by Sam Graham (Member # 2889) on 01-20-2010, 09:07 AM:
 
Try Garden Ridge if there's one in your area. Not sure about movie poster sizes specifically, but they have a huge selection of frames.
 
Posted by Mike Schindler (Member # 1309) on 01-20-2010, 09:48 AM:
 
I get mine from Michaels craft stores. I think regular price is about $20, but they have so many sales and coupons that you never really have to pay more than about $10.
 
Posted by Frank Angel (Member # 248) on 01-20-2010, 12:19 PM:
 
I use American Frame Company. The nice thing about them is that they sell by the inch, so you specify exactly what your poster size is 27 x(40 or 41) and get those exact pieces and the hardware to put them together and hooks to hang them. The pieces are slotted with enough width to slide in the poster on a piece of standard foam core and a 1/16th inch plexy cover. AND, as you can see, they come in a nice variety of finishes and colors.

For some reason the site doesn't indicate that you can buy them by the piece, (the site is selling "kits") but you can. Best to talk to them on the phone -- nice people too.
 
Posted by Paul Mayer (Member # 355) on 01-20-2010, 04:11 PM:
 
When I needed some cheap frames to display part of my Japanese theater poster collection at several shows I went with Displays2Go. Prices come down a bit if you buy in quantity (I bought 20 24x36 and 10 27x41 at that time).

Also, here's a link to another older thread about frames, just to see more suggestions:

Super-cheap 1-sheet frames?
 
Posted by Jeremy Jorgenson (Member # 2989) on 01-20-2010, 10:28 PM:
 
quote: Mike Schindler
I get mine from Michaels craft stores.
Ok, I'll check them out too.

quote: Paul Mayer
here's a link to another older thread about frames, just to see more suggestions
somehow that one didn't come up in my search, I wonder why? ... anyway, thanks for linking to it. I still would've bumped up this one before that one as this is from 2000 & that's from 2006. [Razz]
 




Powered by Infopop Corporation
UBB.classicTM 6.3.1.2