This is topic How'd You Get Here? in forum Film-Yak at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=000136
Posted by Andrew McCrea (Member # 674) on 02-18-2001, 09:38 AM:
Hey Everyone,
I just wanted to know how you all got here! I got here from Film-Center and I got to Film-Center from Altavista, searching for theatre stuff.------------------
Andrew McCrea
"I'm Not Bad, I'm Just Drawn That Way!" - Jessica Rabbit
Posted by Randy Stankey (Member # 64) on 02-18-2001, 09:56 AM:
Sherlock told me.
Posted by Bob Maar (Member # 763) on 02-18-2001, 10:31 AM:
I was told by Don Lane at ScreenCheck when he saw my named mentioned in a post.
Posted by Darryl Spicer (Member # 711) on 02-18-2001, 11:01 AM:
I got here from a link on a site called Cinematour.com
Posted by John Pytlak (Member # 331) on 02-18-2001, 11:10 AM:
Gordon McLeod told me about Film-Tech. He's done several installs at Kodak in Rochester, working with Entertainment Equipment Corporation in Buffalo (Jim Lavorato Jr.). I got to know Jim's Dad when I worked at the Grandview Drive-In in Angola, NY, 35 years ago.------------------
John P. Pytlak, Senior Technical Specialist
Worldwide Technical Services, Entertainment Imaging
Eastman Kodak Company
Research Labs, Building 69, Room 7419
Rochester, New York, 14650-1922 USA
Tel: 716-477-5325 Cell: 716-781-4036 Fax: 716-722-7243
E-Mail: john.pytlak@kodak.com
Web site: http://www.kodak.com/go/motion
Posted by Aaron Sisemore (Member # 145) on 02-18-2001, 11:23 AM:
I believe I had heard about Film-Tech for the first time from a posting on the rec.arts.movies.tech newsgroup... Aaron
Posted by Sean M. Grimes (Member # 445) on 02-18-2001, 12:54 PM:
I believe it was from the GTS website that I found film-tech. The GTS site was one of the first film related sites that I found while crusing the net one day - I figured that there must be something else to do than check my email and play online games.
Posted by Ian Price (Member # 14) on 02-18-2001, 01:21 PM:
Joe Redifer told me the URL and asked me to post. Also, I think we were posting in the Smart projection bulletin board. Bedford turned me on to History in a Can and I sort of heard about Brad there as well. It's all a little fuzzy. 
Posted by Greg Mueller (Member # 17) on 02-18-2001, 01:57 PM:
When Brad split away from History in A Can and started Film Tech I gravitated over here.------------------
Greg Mueller
Amateur Astronomer, Machinist, Filmnut
Posted by Martin Frandsen (Member # 74) on 02-18-2001, 02:40 PM:
I joined Film-tech in june 1999 when Brad started the site as a UBB. I got here from a link from HIAC.------------------
Martin Frandsen
Film crazy!, Big 70mm fan!
Posted by Joe Redifer (Member # 3) on 02-18-2001, 03:25 PM:
This is my first time on the site. Ian Price e-mailed me the URL and asked me to post. Neat site!
Posted by Jason Burroughs (Member # 68) on 02-18-2001, 09:42 PM:
I've been with this site since the days it was hosted in the personal webspace on AO Hell (AOL), when Brad let me know about his new website.
Posted by Rachel Carter (Member # 693) on 02-19-2001, 12:10 AM:
I first came here when one of the "big bosses" told me about a rude post concerning the last theater I worked at 
Now the person that posted works at that same theater 
------------------
"Blood is thicker then blondes" - From the movie, Save the last Dance.
FUNNY!!!!!
Posted by Dustin Mitchell (Member # 372) on 02-19-2001, 02:24 AM:
I got a bottle of Film-Guard in the mail with www.film-tech.com on the bottle.
Posted by Barry Floyd (Member # 385) on 02-19-2001, 07:53 AM:
I found a link to this site from "Drive-Ins.com", a site run by Jen and Kip Sherer.
In my search for drive-in stuff, I stumbled across their "links" page. Been back every day since then. ------------------
Barry Floyd
Floyd Entertainment Group
Nashville, Tennessee
(Drive-In Theatre - Start-Up)
Posted by Michael Barry (Member # 237) on 02-19-2001, 08:22 AM:
My projection mentor, guru and all-round awesome entity John Wilson pointed me in this direction. I remember saying one day that I wished there was more traffic on rec.arts.movies.tech and he suggested coming here! 
Posted by Colin Wiseley (Member # 247) on 02-19-2001, 09:29 AM:
It came up when I searched for the word "projectionist" on Yahoo back in the fall of 99.
------------------
Colin Wiseley
Lyric Theatre
Blacksburg, VA
www.thelyric.com
Posted by Joe Smith (Member # 190) on 02-19-2001, 10:22 AM:
In May '99 I became interested in the possibility of re-opening a drive-in theatre in my hometown and started searching the web for info on drive-ins and projection equipment. Somewhere during the search I stumbled over a link to this site and registered. Been lurking here ever since. Although I didn't actually open the drive-in, I belong to a non-profit community organization that did reopen it in 2000! www.hullsdrivein.com
Posted by Matt Adams (Member # 756) on 02-19-2001, 02:41 PM:
i was researching the use of xenon bulbs for a school project in the fall of 99, and found the pages on improving presentation, and made my co-workers read it.
Posted by Paul G. Thompson (Member # 655) on 02-19-2001, 03:21 PM:
I found it when Ken Layton referred me to the ground level forum about information pertaining to Regal.
Posted by Aaron Mehocic (Member # 15) on 02-19-2001, 05:37 PM:
A Yahoo search in May of '99. My first post was in response to the crap Lucas was pulling with revenues from Episode I. I was shocked that the web master answered one of my questions personally. Thanks Brad!
Posted by Stephen Jones (Member # 16) on 02-19-2001, 05:39 PM:
I found Film-tech by searching the Internet for sites on projection and tech stuff etc.Its the only site which has been helpful and have meet via the chat room some good people. 
Stephen.
Posted by Sean Weitzel (Member # 244) on 02-19-2001, 07:56 PM:
I found this place from HIAC. Oddly enough, I had been an active participant on rec.arts.movies.tech since 1995 and never saw a reference to film-tech on that group.
Posted by John Pytlak (Member # 331) on 02-19-2001, 08:52 PM:
Interesting, the variety of ways each of us found our way to this site. One sure way to grow the participation is to personally "spread the word" about Film-Tech. If each of us gets a friend or colleague to actively participate, the added diversity of backgrounds and expertise will make the discussions all the more interesting and helpful. If you know someone who has been "lurking", tell them to jump into the conversation --- you're among friends.
------------------
John P. Pytlak, Senior Technical Specialist
Worldwide Technical Services, Entertainment Imaging
Eastman Kodak Company
Research Labs, Building 69, Room 7419
Rochester, New York, 14650-1922 USA
Tel: 716-477-5325 Cell: 716-781-4036 Fax: 716-722-7243
E-Mail: john.pytlak@kodak.com
Web site: http://www.kodak.com/go/motion
Posted by Kevin Crawford (Member # 469) on 02-19-2001, 09:00 PM:
I found out about the site from a propoganda pamphlet my manager brought up to the booth for Film-Guard.Sorry to hear about your marketing failure Brad. Only one person responded out of the hundreds of distributed pamphlets.
Posted by Leo Enticknap (Member # 534) on 02-20-2001, 12:52 PM:
I found out about it from a feature article in 'Cinema Technology', which is an industry magazine published by the British Kinematograph, Sound and Television Society.
Posted by Josh Jones (Member # 447) on 02-21-2001, 05:56 PM:
I was informed By TJ, a tech from MTS back in 99. One day I found a topic I wanted to say something about and thought, "what the hell"Josh
Posted by Robert Golding (Member # 746) on 02-22-2001, 02:01 AM:
I was talking to Warren Blessing and he told me John Eickhof was posting on film-tech, so I took a look and decided to register. It also allowed me to get in touch with John. I met John in the late 70's here in California.
I also saw a post about how you know if you are in California. Not bad.
Posted by Bruce McGee (Member # 131) on 02-22-2001, 08:11 AM:
I first came to the site in Dec. 98 when it was called "Brad Miller and Associates."I only dropped in to have a look at the picture forum where there were only 3-4 different links. I was (and still am) amazed at the size of Bob Leaders Norelco monsters!
Now I am hooked. Thanks Brad!
NOTE: I had to re-register in 8/99 when the site had to be moved the first of many times....
------------------
"It's the suspense that gets me!"--B. Bunny
Posted by Jason Black (Member # 684) on 03-04-2001, 11:51 PM:
I found out about the site from one of two places.. an operator at a sister theatre.. or or sound tech.. I forget... But at any rate, I'm an avid user and reader of Brad's products, Film-Tech.com & Film-Gaurd.*Note to Brad* It's still ok to mail that product endoremenet check to my house!
ops:

------------------
The early bird may get the worm, but the second mouse gets the cheese!