This is topic CP55 - matrix nonsync? in forum Film-Yak at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=000793
Posted by Dave Macaulay (Member # 813) on 03-20-2002, 08:51 AM:
Can I decode the nonsync input on a 55? What mods are required (if any) I'd like to be able to switch between "normal" mode and matrix mode.
This is for showing DVD source material with a video projector.
Someone here must have tried this...
Posted by Darryl Spicer (Member # 711) on 03-20-2002, 09:23 AM:
You can find information on this in the thread started By Josh Jones in the film handlers section called Turning on the center channel in non-sync.
Posted by Paul G. Thompson (Member # 655) on 03-21-2002, 03:25 PM:
Lift one side of the diode (or remove) in the INC line at the F-6 address on the 243 card.
This information is also posted in Josh Jones's "Turning On Center Channel In Non-Sync" tread in Film Handler's Forum, dated 10 March 2002. Steve Guttag was kind enough to provide this information to me and Josh.
Paul