Film-Tech Forum ARCHIVE: Happy Birthday Nate!

This is topic Happy Birthday Nate! in forum Film-Yak at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=002271

Posted by Joe Redifer (Member # 3) on 07-17-2003, 02:48 AM:

The ol' calender (actually his forum profile) says it's forum member Nate Lehrke's (pictured directly below) birthday today.

Only cool people have birthdays in July. Otherwise it's not worth remembering.

This thread is also ANOTHER opportunity to congratulate Josh! Congratulations Josh!

Posted by Paul G. Thompson (Member # 655) on 07-17-2003, 02:57 AM:

Happy Birthday, Nate. [Smile]

Posted by Nate Lehrke (Member # 1460) on 07-17-2003, 03:11 AM:

Sadly, that is the best picture of me [Frown]

Posted by Phil Hill (Member # 371) on 07-17-2003, 03:35 AM:

Happy B'Day Nate! I hope everything comes out OK... [Razz]

>>> Phil

Posted by Brad Miller (Member # 2) on 07-17-2003, 03:42 AM:

Here's to 2-ply and a happy birthday. [Big Grin]

Posted by Paul G. Thompson (Member # 655) on 07-17-2003, 01:12 PM:

How the hell am I winding up with these double posts? I thought that was not supposed to happen. [Confused]

It seems to happen when I make a typo edit.

Posted by Paul G. Thompson (Member # 655) on 07-17-2003, 01:13 PM:

Brad, send him a single-ply roll with 1000 sheets. The two-ply rolls are only good for about two or three wipes, especially if the butt leaks after a Mexican dinner. [Big Grin]

Posted by Joe Redifer (Member # 3) on 07-17-2003, 03:37 PM:

Paul, to avoid the double posts, avoid using the "back" button on your browser while visiting the forums. Do you use the "show new posts" feature, make a reply and use the "back" button to get back to the list of new posts? That can do it.

Posted by Paul G. Thompson (Member # 655) on 07-17-2003, 09:12 PM:

OK, Joe...I'll try that. Thanks.