Film-Tech Forum ARCHIVE: Jig and Fixture Designing

This is topic Jig and Fixture Designing in forum Film-Yak at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=004532

Posted by Will Kutler (Member # 770) on 03-03-2006, 07:39 PM:

Hi All!

Here is an example of Tool and Fixture designing and building. This is a conception drawing. Designed using SolidEdge and designed for production use on HAAS 3-Axis Machining Centers.

Yours truly is the tool designer, with the SME tool and fixture designing book as a reference and using Carr-Lane tooling components.

The component being machined is a cast turbor charger housing...an actual project that is part of MECO at ASU-Polytechnic.

Computer lab is now closing, so I need to continue this post later and explain how things work.

Posted by William Hooper (Member # 71) on 03-06-2006, 04:40 AM:

Stop fiddling around & machine me some aluminum rear hubs & cylinder heads for the GT6.