Film-Tech Forum ARCHIVE: Power tools and Standees...

This is topic Power tools and Standees... in forum Film-Yak at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=005653

Posted by Andrew Bangs (Member # 4938) on 12-18-2008, 12:29 PM:

Do they mix??? Boy I had one standee I think it was Eragon and I wanted to take a sawzall to the thing. although the other day I wish I had my screw gun as I was putting in about 50 screws on one standee.

Posted by Monte L Fullmer (Member # 2797) on 12-18-2008, 12:43 PM:

...and a third hand would come in handy as well...

Posted by Jonathan Althaus (Member # 5042) on 12-18-2008, 12:49 PM:

3 hands, longer arms, better design all could help. Oh and floor employees who can follow directions.

Posted by Andrew Bangs (Member # 4938) on 12-19-2008, 01:12 AM:

quote: Jonathan Althaus
Oh and floor employees who can follow directions

Frankly directions that made sense and did not skip steps would also help.

Posted by James Westbrook (Member # 3690) on 12-19-2008, 02:29 PM:

Most standees I encounter use short bolts with wing nuts. I am not certain how a drill or other power tool would really work with these.
The Sawzall would make disassembly much quicker, and make the standee easier to fit in the cardboard recycling bin...