Film-Tech Forum ARCHIVE: Wanted: SDDS 3000 installation & maintenance manuals

This is topic Wanted: SDDS 3000 installation & maintenance manuals in forum Film-Yak at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=005858

Posted by Phil Hill (Member # 371) on 07-25-2009, 01:08 PM:

Wanted: SDDS 3000 installation & maintenance manuals

Looking for:

DFP-R3000 Installation Manual (for installation of the Reader)
DFP-R3000 Maintenance Manual (for component-level service of the Reader)
DFP-D3000 Maintenance Manual (for component-level service of the Decoder)

If you can help, please email me or send to Film-Tech for inclusion in the Equipment Manual Warehouse.

Thanks!

Posted by Tristan Lane (Member # 1169) on 07-25-2009, 02:08 PM:

Cinematech Link!

Sorry Phil, I'm just too lazy to download them and email them.

Posted by Phil Hill (Member # 371) on 07-25-2009, 02:34 PM:

Tristan: Thank you a bunch! [beer]

That link is great and a BIG help! I downloaded most of what I needed.

Thanks again!

>>> Phil

(Hopefully Adam-The-Brute will get off his dead ass and add them to the F-T Equipment Manual Warehouse.) [evil]

Posted by Tristan Lane (Member # 1169) on 07-25-2009, 03:03 PM:

It would probably be a good idea if he did. I'm not sure if Cinematech is even still in business, and I wonder how long the website will remain active. As far as I know, this is probably one of two or three places online that have the manuals available for download.

It's a shame they weren't more widely distributed back in the day....There's a ton of useful information in those manuals.

Posted by Adam Martin (Member # 641) on 07-25-2009, 04:19 PM:

LOL that DCP-1000 operations manual was stolen from Film-Tech.

Posted by Phil Hill (Member # 371) on 07-25-2009, 04:33 PM:

Adam, you've obviously mistook me for someone who gives a shit... I was referring to the SDDS 3000 manuals.

Get with it boy!

Huggs, and yours in Christ...your pal,

>>> Phil

Posted by Adam Martin (Member # 641) on 07-25-2009, 04:53 PM:

And you mistook me for someone who does anything around here. [Razz]

Posted by Phil Hill (Member # 371) on 07-25-2009, 05:00 PM:

[thumbsup]