Film-Tech Forum ARCHIVE: Barco processor ap24 3D automation

This is topic Barco processor ap24 3D automation in forum Film-Yak at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=007674

Posted by Ashish Kumar (Member # 10440) on 08-18-2019, 04:42 AM:

Dear All

Please suggest I am using doremi dcp2000 with barco processor AP24 so how do i make the fader cue in the doremi server with RJ45

Posted by Carsten Kurz (Member # 5396) on 08-18-2019, 07:26 AM:

The AP24 is an AP20 in disguise. So, all basic AP20 network automation commands should work with the AP24 as well.

http://www.film-tech.com/warehouse/manuals/TN-H413.pdf

http://www.film-tech.com/cgi-bin/ubb/f16/t001185/p2.html

- Carsten

Posted by Brad Miller (Member # 2) on 08-19-2019, 12:14 PM:

Ashish

Please edit your post to make the subject title of this thread less of a teaser.