Dolby remote fader

[Neal Scanlan]

Hi,
I have a Dolby remote fader Cat no: 123

Does anyone know if this unit is compatible with a Dolby CP 650?

[Alan Lyman]

YES,but in the menu in the cp650,you have to choose remote volume.and then ONLY this remote will work on the cp.Not its own volume button.
you only connect two wires from the cp to the pot.meter directly.

alan

[Neal Scanlan]

Thank you Alan for your help.
Regards
Neal

[Steve Guttag]

They call it "Auditorium Fader" not remote and it will be symbolized with an "A" in the LCD screen instead of "L" for local. The easy way to change it...hit the three grey buttons in order. When you want to switch it back...hit the three grey buttons in order again (just remember it will still be at the fader level that the auditorium fader was at...and, if not connected...0.0.

The CAT123 is the "Master" fader of the CP50 faders and has the changeover circuitry, such as it is, in it. The CAT122 is the fader only. You only need the 100K pot for the fader. The orange box is for looks and the pretty 0-10 numbering (with adjustable detent) in your application. See the CP50 manual for its connectivity since it uses letters for its terminals.

[Neal Scanlan]

Thank you Steve for the clarification, most helpful.