ICP and DeOxit story

[Leo Enticknap]

I was going by the Series 2 training slides, which state that 486 is a service door tamper, and 482 + 484 are IMB marriage errors. According to the error...

[Ryan Gallagher]

I'll throw another one in the mix (and beg forgiveness of my co-projectionist later). Not as audience facing. But like I said we had minimal experience...

[Steve Guttag]

I, recently, ran into an issue where a different problem lead to a new problem. I had a Barco DP2K-20C that was throwing Enigma communication errors,...

[Steve Guttag]

How often did you need to "reseat" cards in a Dolby CP100, 50, 200, 55, 65?

Why does Barco need 100:1 more Signal Backplanes than...

[Ryan Gallagher]

Was greeted for a tech check today by handshake issues between the christie and it's GDC IMB in our smaller room.
I'll have to dig up the IMB model,...

[Ryan Gallagher]

Is it possible to send DCP video data to a SX3000 IMB from an earlier box server like SX2000 or SA2100?

I'm realizing the IMB port layout...

[Ryan Gallagher]

Will talk to GDC before just plugging a monitor into it. When we pull it to clean and reseat (likely tomorrow, all production staff are off today), the...

[Ryan Gallagher]

Based on the port layout (single eSata), pretty sure we are in fact dealing with an SX-2000AR/TR IMB.
https://www.gdc-tech.com/wp-content/...N_...

[Marcel Birgelen]

Yeah, I didn't want to pronounce the thing dead yet, at least not until all reasonable resurrection measures have been tried. But the "Connection...

[Hong Sung Hyeok]

In my experience, the ICP temperature warning and color issues aren't really related.

Regarding ICP Temperature

What is the...

[Ioannis Syrogiannis]

It would help you more, if you connected a screen to the "console out" mini display port and see what that shows. Admittedly, mini display ports...

[Dave Macaulay]

First reseat the ICP, and cleaning its edge connector with alcohol and a non abrasive wipe is a good idea. Use static safety procedure. Next reseat the...

[Leo Enticknap]

This is a difficult one, because the theater is in a small town a remote, rural area, and there is no tech (that I know of) that could get there without...

[Steve Guttag]

The CPU board is the top board and has the ICP fan mounted in the middle of it to blow down onto the ICP heat sink. If the can reseat the other boards,...

[Fraser Falconer]

Hi Leo,
A projector log can give you a good look at what the projector thinks about the ICP. What were the LED's on the ICP doing when the projector...