Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Operations   » Film Handlers' Forum   » carpeted booths? (Page 2)

 
This topic comprises 4 pages: 1  2  3  4 
 
Author Topic: carpeted booths?
Stephen Jones
Master Film Handler

Posts: 314
From: Geelong Victoria Australia
Registered: Jun 99


 - posted 10-02-1999 10:56 PM      Profile for Stephen Jones   Email Stephen Jones   Send New Private Message       Edit/Delete Post 
I have worked on both carpet and vinyl covered floors and prefer vinyl to carpet as I find it easier to keep clean, the problem I found with carpet is that it collects cue foil, used splicing tape but worst of all after techs have left after a service or installation work is the amount of solder drips,bits of wire, metal fileings etc they leave behind.Even after useing a powerfull vacum cleaner, bits still remain for weeks after.

------------------

 |  IP: Logged

Rick Long
Jedi Master Film Handler

Posts: 759
From: Toronto, Ontario, Canada
Registered: Nov 1999


 - posted 10-03-1999 09:50 PM      Profile for Rick Long   Email Rick Long   Send New Private Message       Edit/Delete Post 
Stephen, as a tech myself, let me suggest a cure for this problem. At the end of the service call, when the tech has gone to wash his hands, answer a page or whatever, sweep up the solder bits, wire, and aperture dust, and dump them into his tool box. You may have to do this on several calls before he gets the idea.
Sorta like training your dog not to go on the carpet - techs just take a lot longer to catch on.

 |  IP: Logged

Rick Long
Jedi Master Film Handler

Posts: 759
From: Toronto, Ontario, Canada
Registered: Nov 1999


 - posted 10-03-1999 10:14 PM      Profile for Rick Long   Email Rick Long   Send New Private Message       Edit/Delete Post 
P.S. Know the difference between an engineer and a technician? You're an engineer until you ask for a raise. Then, suddenly, you're a technician.

 |  IP: Logged

Randy Stankey
Film God

Posts: 6539
From: Erie, Pennsylvania
Registered: Jun 99


 - posted 10-07-1999 12:05 AM      Profile for Randy Stankey   Email Randy Stankey   Send New Private Message       Edit/Delete Post 
'My booth' at the Cinema-Googolplex (TT17) has the worst static problems. During the winter the humidity goes down to less than 40%. Humidifiers in the booth don't help. Even if you put the thing right next to the platter. The place is too darned big. I don't think carpet would make any difference. (but it sure would make that 750-foot walk down to #17 from #1 a lot nicer! -- Only problem is... Who would vacuum it every week??!! -- It's hard enough to get people to mop the tile floor!)

(I'm trying to get the boss to buy some FilmGuard, too!)

 |  IP: Logged

William Hooper
Phenomenal Film Handler

Posts: 1879
From: Mobile, AL USA
Registered: Jun 99


 - posted 10-11-1999 02:43 AM      Profile for William Hooper   Author's Homepage   Email William Hooper   Send New Private Message       Edit/Delete Post 
Regular paint on cement floors (walls, ceilings, ornamental pilasters) will almost always be fairly short-lived. The paint for cement is 2-part epoxy paint; the paint store will know what you want. Get application instructions, deal with the muriatic acid. Nasty going on, nearly bulletproof when its done. You'll love it if you've got it.

Regular paint on cement will forever be chipping, peeling, etc. Do it right the first time: if regular paint is already on the cement, it's scraping, and/or blasting to get the wrong stuff off before the new stuff goes on.

Inherited piebald regular paint on the booth floor here, wonderful (except for the application) 2-part epoxy in other areas with painted cement floors & walls.

 |  IP: Logged

John Walsh
Film God

Posts: 2490
From: Connecticut, USA, Earth, Milky Way
Registered: Oct 1999


 - posted 10-11-1999 10:12 AM      Profile for John Walsh   Email John Walsh   Send New Private Message       Edit/Delete Post 
Be careful when using the muriatic acid. Even from a distance away, it will cause any exposed finished surfaces to discolor. This includes ball bearings, (both inside and out)
gate and trap runners, etc.
But it does make that floor paint stick like crazy.

 |  IP: Logged

Darren Brown
Film Handler

Posts: 2
From: Buenos Aires Argentina
Registered: Oct 1999


 - posted 10-20-1999 01:04 PM      Profile for Darren Brown   Email Darren Brown   Send New Private Message       Edit/Delete Post 
I prefer a short pile anti static carpet.Its easy to install and keep clean. Its great for noise and those tiny little screws that occasionally fall on the floor donīt go rolling into never never land. If you follow the first rule of film handling and "KEEP THE FILM OFF THE FLOOR" you will not have any problems with carpet. In our booths I allways secify beige walls with "Christie Blue" carpet(to match the consoles) and electrical ducts are "Christie Blue"as well. I like it and it looks great.

 |  IP: Logged

Will Kutler
Phenomenal Film Handler

Posts: 1506
From: Tucson, AZ, USA
Registered: Feb 2001


 - posted 06-25-2001 05:42 PM      Profile for Will Kutler   Email Will Kutler   Send New Private Message       Edit/Delete Post 
I am not really a fan of carpeted booths. carpet can become nasty over time. As a machinist, I like painted/no slip flooring. I believe that there is also such a thing as sound deadening non-slip tile! Another aspect to consider. The Christie AW-3 MUT's do not have the sturdiest legs/feet. It was a little difficult to get them to solidly plant still on a carpeted floor during build-up/tear-down. I had to constantly watch for film bounce to avoid platter scratches, and had to constantly readjust the MUT during these operations.

 |  IP: Logged

Paul Cunningham
Expert Film Handler

Posts: 146
From: Melbourne, Australia
Registered: Jun 2000


 - posted 06-25-2001 06:28 PM      Profile for Paul Cunningham   Email Paul Cunningham   Send New Private Message       Edit/Delete Post 
If you are going to put carpet down, choose the right one, many carpets tend to release "fur balls" when they are new and even after a long time can still let lots of fluff and stuff loose. Carpet is a dust trap, even if you vacuun it regularly it doesn't come out, try using a water cleaner ( I call it a VAX I dont know what its real name is) on your carpet and see how much crud comes out. Every time you walk on carpet a small dust cloud will be created which you will not even be able to see and when you vacuum you'll get an even bigger one. I definitely dont like carpet in the projection room.

Paul

 |  IP: Logged

Paul G. Thompson
The Weenie Man

Posts: 4718
From: Mount Vernon WA USA
Registered: Nov 2000


 - posted 06-25-2001 08:22 PM      Profile for Paul G. Thompson   Email Paul G. Thompson   Send New Private Message       Edit/Delete Post 
Bring your house trained dog in the booth. He'll eat the furballs, and throw them up in just one pile for you. Dogs are excellent carpet cleaners. They'll eat anything, such as popcorn and candy, and lick up projector and popcorn oil. They also make good garbage disposals for the hot dogs that have to be charged off to spoilage. They are good alert alarms if unauthorized personnel enter your forbidden territory. They love the TES people, too. (What more can you possibly ask for?) They also use their paws to collect splice tape and cue tape remnants, just to mention a few. And, they keep you company on long 10 to 12 hour shifts.

Seriously, I prefer carpeted booths, as they cut down the ambient noise, as well as the strain on feet, ankles, knees, and legs. If the booth floor carpet is swept daily with a vacuum sweeper, and cleaned with a steam cleaner on a regular basis, the dust problem is negligable. (providing, of course, an industrial grade of carpet is used)


 |  IP: Logged

Christopher Duvall
Jedi Master Film Handler

Posts: 500
From: Denver, CO
Registered: Dec 1999


 - posted 06-25-2001 10:58 PM      Profile for Christopher Duvall   Email Christopher Duvall   Send New Private Message       Edit/Delete Post 
We have the entire booth carpetd except under the projectors and platters. It is definately much quiter that a tiled floor. As for static, for the year I have been there, I have not seen much static at all. Even in the desert.
Keeping the booth clean has never been a problem for me either with either carpet or tiles. I tend to be obsessive/compulsive about keeping the booth in a hospital like state.

To each his own.

------------------
Chris Duvall
General Manager
Regal Cinemas Colonnade14
Las Vegas, NV

 |  IP: Logged

Mike Judge
Film Handler

Posts: 50
From: Seattle, WA
Registered: Aug 2000


 - posted 06-25-2001 11:41 PM      Profile for Mike Judge   Email Mike Judge   Send New Private Message       Edit/Delete Post 
Chris, is yours an old ACT III theatre? When I was last down there I was over at the Village Square and I know they're the Act III style, I love that setup, so much nicer. I'm in a true Regal build. Blah...I'd kill for an old Act III booth.

 |  IP: Logged

Christopher Duvall
Jedi Master Film Handler

Posts: 500
From: Denver, CO
Registered: Dec 1999


 - posted 06-26-2001 01:40 AM      Profile for Christopher Duvall   Email Christopher Duvall   Send New Private Message       Edit/Delete Post 
The Colonnade was designed by ACT III and the construction was finished by Regal. Overall, an ACT III building with very minute Regal touches. A few of the Regal things I could have gone for did not make it, but I can't complain. The building is great. The only thing I do not like is the weird color scheme. Or should I say multiple schemes? The building is almost identical to Village Square.

------------------
Chris Duvall
General Manager
Regal Cinemas Colonnade14
Las Vegas, NV

 |  IP: Logged

David Kilderry
Master Film Handler

Posts: 355
From: Melbourne Australia
Registered: Sep 1999


 - posted 06-26-2001 06:30 AM      Profile for David Kilderry   Author's Homepage   Email David Kilderry   Send New Private Message       Edit/Delete Post 

Carpet was not too bad in some old single screeners once the carbons were removed but...............

At a sixplex that I worked at cheap carpet was installed in all boxes (booths) if it was not vaccumed weekly it accumulated all sorts of dust and other debris that often found its way onto leaders and tails.

One amusing occurrence directly related to the carpet was with our brand new (back then) Dolby CP 200. We ran 70mm all the time on spools with Vic 8's. As you selected your next format for the change-over and waited to hit "GO" it sometimes changed over the sound before you hit the button!

This was due to a static charge picked up from the carpet that would arc from your finger when you were still half an inch away. I can tell you on a full house for "Raiders" it was very embarrassing!!!!

David Kilderry

 |  IP: Logged

Bob Maar
(Maar stands for Maartini)


Posts: 28608
From: New York City & Newport, RI
Registered: Feb 2001


 - posted 06-26-2001 10:23 AM      Profile for Bob Maar   Author's Homepage   Email Bob Maar   Send New Private Message       Edit/Delete Post 
One of my great surprises came after taking a few days off back about this time in 1969 where I was supervising construction a twin theatre in Muskogee,Oklahoma, I came back to find the booth carpeted. Since they had gone to all the trouble of cutting around the projector bases and the operator wasn't complaining I left it. The Manager/operator kept that booth immaculate for many years. It's the only time I did a booth with carpet.

Again I owe you fellows a debt of gratitude...thank's for the memories.

 |  IP: Logged



All times are Central (GMT -6:00)
This topic comprises 4 pages: 1  2  3  4 
 
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.