difference from strng type R switcher and non R type?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John Eickhof
    Pro Film Handler
    • Jun 2020
    • 417
    • wendell, idaho

    #1

    difference from strng type R switcher and non R type?

    the title is pretty much the question, I have a 1-3k switcher but its labelled 'R'? looks just like the ones I have without the "R' in the model number...is it maybe reverse polarity for use in the xenon super trouper? model 6290100-R V1
  • Mark Gulbrandsen
    Film God
    • Jan 2020
    • 3093
    • Nashville, TN

    #2
    Good question! If they have MS connectors you can open.them up and see if the red and black DC wires are reversed at the connector. However, it could mean "Revised". Is this the wrinkle black, Version 1 suitcase type? Or a compact type? The Compact could be either wrinkle black or gray hammertone. If it's a compact beware that they were derated to 2.5K.

    Strong Lighting is still in business, but run as a seperate entity. You could call them.and ask if they might know what the "R" means if you can't determine anything else.

    Comment

    • John Eickhof
      Pro Film Handler
      • Jun 2020
      • 417
      • wendell, idaho

      #3
      thanks Mark, it is the compact wrinkle black one label says 'R' TYPE SWITCHING POWER SUPPLY V1 so I would think it is the downgraded one revised from the larger suitcase model...i'm definitely going to check the terminations!

      Comment

      • Ryan Gallagher
        Film God
        • Nov 2022
        • 2855
        • Austin, Texas, USA

        #4
        The "R" might have also stood for "Remote"? Perhaps relating to the ability to remote the current control trim to the console?, or the "Remote Master" feature when having additional slave supplies configured with it? If that was their first time to introduce such features?

        Comment

        • Ryan Gallagher
          Film God
          • Nov 2022
          • 2855
          • Austin, Texas, USA

          #5
          Or Duh... could it just have stood for "Receptacle"... to reference the MS Connector units? I have a variety, I'll have to check.

          I know it did not reference the existence or non-existence of the "Spot/Console" mode switch. Have a couple "R" series both with and without that.

          Comment

          • Steve Guttag
            Film God
            • Jan 2020
            • 3777
            • Annapolis, MD

            #6
            I'm pretty sure an "R" was "refurbished" or "reconditioned". As in it came back to Strong and was worked on.

            Comment

            • John Eickhof
              Pro Film Handler
              • Jun 2020
              • 417
              • wendell, idaho

              #7
              Thanks guys! Steve your suggestion is probably the one, like Mark said the early black versions were having a lot of failures by running 3kw loads...makes sense, I forgot that I had three different ones fried and were exchanged by Strong, I never paid attention to the replacements...

              Comment

              Working...