Installing an ICMP in very early DPXK-XXB

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Steve Guttag
    Film God
    • Jan 2020
    • 3777
    • Annapolis, MD

    #16
    I have had gen-1 CCBs fail like that (just had one about 3 months ago do that...without changing anything). It will definitely boot...though VERY slowly without an SDI or IMB in the slot (takes about 5 minutes for it to "give up" talking to the SM. It will be a blinking green taillight during this and a solid green when done (the SM is what sets a red taillight). If you have one, bring an SDI with a charged enigma with you as that will allow a faster boot up.

    Comment

    • Leo Enticknap
      Film God
      • Jan 2020
      • 3572
      • Loma Linda, CA

      #17
      It had an SDI with a charged Enigma in it in the first place, and even after putting it back, the boot would not complete (the longest I left it for was around 15 minutes). The CCB will answer a ping: the ones that failed totally I've seen in the past have not.

      Comment

      • Randy Stankey
        Film God
        • Jan 2020
        • 1388
        • Erie, PA, USA

        #18
        Originally posted by Steve Guttag
        ...takes about 5 minutes for it to "give up" talking to the SM. ...
        Betcha' it's 4 minutes and 15 seconds!

        Comment

        Working...