Kinoton FP 38E

[Neal Scanlan]

Hello,
Can I ask, is a memory backup battery used on the Kinoton FP 38E and if so where is this located?

[Steve Guttag]

None that I am aware. The programming of the motherboard is via PIC chips. The Lenze motor controller should be via NVRAM and has a module in the upper-left that should have its configuration. The MDE/FPS intermittent motor controller should also be some form of NVRAM but can be configured via the appropriate software and a serial cable.

There are no batteries that I am aware of.

[Neal Scanlan]

Thank you Steve.