In our smaller room I've never operated with regularity, but am now due to big room being closed.
We have a blu-ray hooked up to both 1xAES digital 3, and 1xSPDIF digital 4.
Those who configured and labeled it made digital 3 as "BR 5.1", and digital 4 as "BR 2.0".
However, the way the 750 is configured. Digital 3 is set to force "ProLogic II" on both PCM and Dolby Digital. Digital 4 was set to PCM "None" and Dolby Digital "Auto" (which only guarantees a 2.0 playback if you are not sending bitstream data from the player).
Given that many if not most blu-rays are in fact DTS-HD MA as their primary discrete format. What is the proper procedure to at least get compressed Dolby 5.1 into the room? It's an Oppo player, I can set the output to LPCM or bitstream. I lose audio as we were configured when I choose bitstream with a DTS-HD bluray as the CP750 can't handle that bitstream. It was previously configured to output LCPM in the Oppo. So I expect all blu-ray's played in this room were playing stereo LPCM and letting ProLogic do the expansion in the CP750?
The proper way feels like bitstream in the player, but use the player menus to select the alternate "fall back" dolby 5.1 version that can be transmitted and decoded via the "auto" setting in the CP750.
Or if you get crazy you could add a HDMI to AES type device and actually switch between DCP and BluRay on your primary discrete input on the CP750?
Just feels like we were very much in compromise territory as previously configured. Unless operators knew to switch things. But the labels indicate this was intentional.
We have a blu-ray hooked up to both 1xAES digital 3, and 1xSPDIF digital 4.
Those who configured and labeled it made digital 3 as "BR 5.1", and digital 4 as "BR 2.0".
However, the way the 750 is configured. Digital 3 is set to force "ProLogic II" on both PCM and Dolby Digital. Digital 4 was set to PCM "None" and Dolby Digital "Auto" (which only guarantees a 2.0 playback if you are not sending bitstream data from the player).
Given that many if not most blu-rays are in fact DTS-HD MA as their primary discrete format. What is the proper procedure to at least get compressed Dolby 5.1 into the room? It's an Oppo player, I can set the output to LPCM or bitstream. I lose audio as we were configured when I choose bitstream with a DTS-HD bluray as the CP750 can't handle that bitstream. It was previously configured to output LCPM in the Oppo. So I expect all blu-ray's played in this room were playing stereo LPCM and letting ProLogic do the expansion in the CP750?
The proper way feels like bitstream in the player, but use the player menus to select the alternate "fall back" dolby 5.1 version that can be transmitted and decoded via the "auto" setting in the CP750.
Or if you get crazy you could add a HDMI to AES type device and actually switch between DCP and BluRay on your primary discrete input on the CP750?
Just feels like we were very much in compromise territory as previously configured. Unless operators knew to switch things. But the labels indicate this was intentional.

Comment